diff options
Diffstat (limited to 'Simulator')
40 files changed, 5148 insertions, 0 deletions
diff --git a/Simulator/Doxyfile b/Simulator/Doxyfile new file mode 100644 index 00000000..f5d4310e --- /dev/null +++ b/Simulator/Doxyfile @@ -0,0 +1,2425 @@ +# Doxyfile 1.8.11 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "My Project" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = docs + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING +# Note: If this tag is empty the current directory is searched. + +INPUT = + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f, *.for, *.tcl, +# *.vhd, *.vhdl, *.ucf, *.qsf, *.as and *.js. + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse-libclang=ON option for CMake. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = YES + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4 + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = Helvetica + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = YES + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES diff --git a/Simulator/Simulator.vcxproj b/Simulator/Simulator.vcxproj new file mode 100644 index 00000000..e165b5ea --- /dev/null +++ b/Simulator/Simulator.vcxproj @@ -0,0 +1,257 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project DefaultTargets="Build" ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup Label="ProjectConfigurations"> + <ProjectConfiguration Include="Debug|Win32"> + <Configuration>Debug</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Debug|x64"> + <Configuration>Debug</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|Win32"> + <Configuration>Release</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Release|x64"> + <Configuration>Release</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Testing|Win32"> + <Configuration>Testing</Configuration> + <Platform>Win32</Platform> + </ProjectConfiguration> + <ProjectConfiguration Include="Testing|x64"> + <Configuration>Testing</Configuration> + <Platform>x64</Platform> + </ProjectConfiguration> + </ItemGroup> + <PropertyGroup Label="Globals"> + <ProjectGuid>{7CF8EE44-A898-46CC-9F6C-1245D1F893BF}</ProjectGuid> + <RootNamespace>Simulator</RootNamespace> + <ProjectName>Simulator</ProjectName> + <WindowsTargetPlatformVersion>8.1</WindowsTargetPlatformVersion> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <PlatformToolset>v140</PlatformToolset> + <CharacterSet>MultiByte</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>true</UseDebugLibraries> + <PlatformToolset>v140</PlatformToolset> + <CharacterSet>MultiByte</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <PlatformToolset>v140</PlatformToolset> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>MultiByte</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <PlatformToolset>v140</PlatformToolset> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>MultiByte</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='LibGen|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <PlatformToolset>v140</PlatformToolset> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>MultiByte</CharacterSet> + </PropertyGroup> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='LibGen|x64'" Label="Configuration"> + <ConfigurationType>Application</ConfigurationType> + <UseDebugLibraries>false</UseDebugLibraries> + <PlatformToolset>v140</PlatformToolset> + <WholeProgramOptimization>true</WholeProgramOptimization> + <CharacterSet>MultiByte</CharacterSet> + </PropertyGroup> + <PropertyGroup Label="Configuration" Condition="'$(Configuration)|$(Platform)'=='Testing|x64'"> + <PlatformToolset>v140</PlatformToolset> + <ConfigurationType>StaticLibrary</ConfigurationType> + </PropertyGroup> + <PropertyGroup Label="Configuration" Condition="'$(Configuration)|$(Platform)'=='Testing|Win32'"> + <PlatformToolset>v140</PlatformToolset> + <ConfigurationType>StaticLibrary</ConfigurationType> + </PropertyGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" /> + <ImportGroup Label="ExtensionSettings"> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Condition="'$(Configuration)|$(Platform)'=='LibGen|x64'" Label="PropertySheets"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <ImportGroup Condition="'$(Configuration)|$(Platform)'=='LibGen|x64'" Label="PropertySheets"> + <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" /> + </ImportGroup> + <PropertyGroup Label="UserMacros" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" /> + <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" /> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <AdditionalIncludeDirectories>$(SolutionDir)external\sqlite3;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <GenerateDebugInformation>true</GenerateDebugInformation> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <Optimization>Disabled</Optimization> + <AdditionalIncludeDirectories>$(SolutionDir)external\sqlite3;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <GenerateDebugInformation>true</GenerateDebugInformation> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <AdditionalIncludeDirectories>$(SolutionDir)external\sqlite3;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <AdditionalIncludeDirectories>$(SolutionDir)external\sqlite3;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='LibGen|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <AdditionalIncludeDirectories>$(SolutionDir)external;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='LibGen|x64'"> + <ClCompile> + <WarningLevel>Level3</WarningLevel> + <Optimization>MaxSpeed</Optimization> + <FunctionLevelLinking>true</FunctionLevelLinking> + <IntrinsicFunctions>true</IntrinsicFunctions> + <AdditionalIncludeDirectories>$(SolutionDir)external;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + </ClCompile> + <Link> + <GenerateDebugInformation>true</GenerateDebugInformation> + <EnableCOMDATFolding>true</EnableCOMDATFolding> + <OptimizeReferences>true</OptimizeReferences> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Testing|Win32'"> + <Link> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + <ClCompile> + <AdditionalIncludeDirectories>$(SolutionDir)external\sqlite3;$(SolutionDir)external\gtest;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + <RuntimeLibrary>MultiThreaded</RuntimeLibrary> + </ClCompile> + </ItemDefinitionGroup> + <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Testing|x64'"> + <Link> + <AdditionalDependencies>sqlite3.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies> + <AdditionalLibraryDirectories>$(SolutionDir)external\sqlite3;</AdditionalLibraryDirectories> + </Link> + <ClCompile> + <AdditionalIncludeDirectories>$(SolutionDir)external\sqlite3;$(SolutionDir)external\gtest;$(ProjectDir)include;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories> + <RuntimeLibrary>MultiThreaded</RuntimeLibrary> + </ClCompile> + </ItemDefinitionGroup> + <ItemGroup> + <ClCompile Include="src\database\Database.cpp" /> + <ClCompile Include="src\modeling\machine\CPU.cpp" /> + <ClCompile Include="src\modeling\Entity.cpp" /> + <ClCompile Include="src\modeling\machine\GPU.cpp" /> + <ClCompile Include="src\modeling\machine\Machine.cpp" /> + <ClCompile Include="src\modeling\Rack.cpp" /> + <ClCompile Include="src\simulation\workloads\Workload.cpp" /> + <ClCompile Include="src\simulation\workloads\WorkloadPool.cpp" /> + <ClCompile Include="src\Simulator.cpp" /> + </ItemGroup> + <ItemGroup> + <ClInclude Include="include\database\Database.h" /> + <ClInclude Include="include\database\Queries.h" /> + <ClInclude Include="include\database\Query.h" /> + <ClInclude Include="include\database\QueryExecuter.h" /> + <ClInclude Include="include\database\QueryResult.h" /> + <ClInclude Include="include\modeling\machine\CPU.h" /> + <ClInclude Include="include\modeling\Datacenter.h" /> + <ClInclude Include="include\modeling\Entity.h" /> + <ClInclude Include="include\modeling\machine\GPU.h" /> + <ClInclude Include="include\modeling\machine\Machine.h" /> + <ClInclude Include="include\simulation\Experiment.h" /> + <ClInclude Include="include\simulation\history\History.h" /> + <ClInclude Include="include\modeling\ModelingTypes.h" /> + <ClInclude Include="include\modeling\Rack.h" /> + <ClInclude Include="include\modeling\Room.h" /> + <ClInclude Include="include\modeling\TypeIndex.h" /> + <ClInclude Include="include\simulation\history\MachineSnapshot.h" /> + <ClInclude Include="include\simulation\history\SimulationHistory.h" /> + <ClInclude Include="include\simulation\Path.h" /> + <ClInclude Include="include\simulation\schedulers\FirstInFirstOutScheduler.h" /> + <ClInclude Include="include\simulation\schedulers\Scheduler.h" /> + <ClInclude Include="include\simulation\schedulers\ShortestRemainingTimeScheduler.h" /> + <ClInclude Include="include\simulation\workloads\Workload.h" /> + <ClInclude Include="include\simulation\history\WorkloadSnapshot.h" /> + <ClInclude Include="include\simulation\workloads\WorkloadPool.h" /> + <ClInclude Include="include\Simulator.h" /> + <ClInclude Include="include\simulation\Section.h" /> + </ItemGroup> + <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" /> +</Project>
\ No newline at end of file diff --git a/Simulator/Simulator.vcxproj.filters b/Simulator/Simulator.vcxproj.filters new file mode 100644 index 00000000..62867ed7 --- /dev/null +++ b/Simulator/Simulator.vcxproj.filters @@ -0,0 +1,152 @@ +<?xml version="1.0" encoding="utf-8"?> +<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> + <ItemGroup> + <Filter Include="Source Files"> + <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier> + <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions> + </Filter> + <Filter Include="Header Files"> + <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier> + <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions> + </Filter> + <Filter Include="Header Files\Simulation"> + <UniqueIdentifier>{0f0b389d-e63f-4516-a936-10fc3c613e1b}</UniqueIdentifier> + </Filter> + <Filter Include="Source Files\Simulation"> + <UniqueIdentifier>{f7ab03e2-f2fe-4c1a-984c-02cda91185e6}</UniqueIdentifier> + </Filter> + <Filter Include="Header Files\Database"> + <UniqueIdentifier>{cf00f1a5-77bf-4883-9003-ad2e902be8d4}</UniqueIdentifier> + </Filter> + <Filter Include="Source Files\Database"> + <UniqueIdentifier>{d9c26546-3166-46e6-ac93-5559d5ab32b8}</UniqueIdentifier> + </Filter> + <Filter Include="Header Files\Math"> + <UniqueIdentifier>{0717ffeb-69ab-4832-904c-3041b3b86ac5}</UniqueIdentifier> + </Filter> + <Filter Include="Source Files\Simulation\Workloads"> + <UniqueIdentifier>{f9450bee-6bd3-4870-ae67-d4e1a5c5c800}</UniqueIdentifier> + </Filter> + <Filter Include="Source Files\Modeling"> + <UniqueIdentifier>{d9476782-e8e4-4dc3-9960-991234e544ef}</UniqueIdentifier> + </Filter> + <Filter Include="Header Files\Modeling"> + <UniqueIdentifier>{22148718-6bb2-4693-ba44-79b5a08591ed}</UniqueIdentifier> + </Filter> + <Filter Include="Header Files\Simulation\Workloads"> + <UniqueIdentifier>{ec05c495-e179-4db3-b21c-fd2292482f95}</UniqueIdentifier> + </Filter> + </ItemGroup> + <ItemGroup> + <ClCompile Include="src\database\Database.cpp"> + <Filter>Source Files\Database</Filter> + </ClCompile> + <ClCompile Include="src\modeling\Rack.cpp"> + <Filter>Source Files\Modeling</Filter> + </ClCompile> + <ClCompile Include="src\simulation\workloads\Workload.cpp"> + <Filter>Source Files\Simulation\Workloads</Filter> + </ClCompile> + <ClCompile Include="src\modeling\Entity.cpp"> + <Filter>Source Files\Modeling</Filter> + </ClCompile> + <ClCompile Include="src\modeling\machine\CPU.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="src\modeling\machine\Machine.cpp"> + <Filter>Source Files\Modeling</Filter> + </ClCompile> + <ClCompile Include="src\modeling\machine\GPU.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="src\simulation\workloads\WorkloadPool.cpp"> + <Filter>Source Files</Filter> + </ClCompile> + <ClCompile Include="src\Simulator.cpp"> + <Filter>Source Files\Simulation</Filter> + </ClCompile> + </ItemGroup> + <ItemGroup> + <ClInclude Include="include\database\Database.h"> + <Filter>Header Files\Database</Filter> + </ClInclude> + <ClInclude Include="include\Simulator.h"> + <Filter>Header Files\Simulation</Filter> + </ClInclude> + <ClInclude Include="include\simulation\workloads\Workload.h"> + <Filter>Header Files\Simulation\Workloads</Filter> + </ClInclude> + <ClInclude Include="include\database\Queries.h"> + <Filter>Header Files\Database</Filter> + </ClInclude> + <ClInclude Include="include\database\QueryExecuter.h"> + <Filter>Header Files\Database</Filter> + </ClInclude> + <ClInclude Include="include\database\Query.h"> + <Filter>Header Files\Database</Filter> + </ClInclude> + <ClInclude Include="include\database\QueryResult.h"> + <Filter>Header Files\Database</Filter> + </ClInclude> + <ClInclude Include="include\modeling\Datacenter.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\ModelingTypes.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\Room.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\TypeIndex.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\machine\CPU.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\modeling\machine\Machine.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\Entity.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\Rack.h"> + <Filter>Header Files\Modeling</Filter> + </ClInclude> + <ClInclude Include="include\modeling\machine\GPU.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\workloads\WorkloadPool.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\schedulers\FirstInFirstOutScheduler.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\schedulers\Scheduler.h"> + <Filter>Header Files\Simulation\Workloads</Filter> + </ClInclude> + <ClInclude Include="include\simulation\schedulers\ShortestRemainingTimeScheduler.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\history\SimulationHistory.h"> + <Filter>Header Files\Simulation</Filter> + </ClInclude> + <ClInclude Include="include\simulation\history\History.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\history\MachineSnapshot.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\history\WorkloadSnapshot.h"> + <Filter>Header Files\Simulation\Workloads</Filter> + </ClInclude> + <ClInclude Include="include\simulation\Section.h"> + <Filter>Header Files\Simulation</Filter> + </ClInclude> + <ClInclude Include="include\simulation\Path.h"> + <Filter>Header Files</Filter> + </ClInclude> + <ClInclude Include="include\simulation\Experiment.h"> + <Filter>Header Files</Filter> + </ClInclude> + </ItemGroup> +</Project>
\ No newline at end of file diff --git a/Simulator/include/Simulator.h b/Simulator/include/Simulator.h new file mode 100644 index 00000000..381639af --- /dev/null +++ b/Simulator/include/Simulator.h @@ -0,0 +1,139 @@ +#pragma once +#include "simulation/Section.h" +#include "database/Database.h" + +#include <iostream> +#include <unordered_map> + +namespace Simulation +{ + /* + The Simulator class controls (the creation of) all experiments, and providing access to the database. + */ + template<typename SimulationType> + class Simulator + { + public: + /* + Initializes the simulator with an empty list of experiments, and with a reference to the database. + */ + explicit Simulator(char* databaseName) : database(databaseName) {} + + /* + Adds a simulation to the list of experiments from the database, removing it from the queue + of experiments in the database. + */ + void load(int experimentId) + { + Experiment experiment = database.createExperiment(experimentId); + experiments.insert(std::make_pair(experimentId, experiment)); + database.dequeueExperiment(experimentId); + } + + /* + Polls the database for new jobs and simulates every queued simulation it finds. + */ + void pollAndLoadAll() + { + int rc = pollAndLoad(); + if (rc != -1) + pollAndLoadAll(); + } + + /* + Polls the database for new jobs and simulates the first it finds. + */ + int pollAndLoad() + { + int id = database.pollQueuedExperiments(); + if (id != -1) + { + std::cout << "Loaded simulation section " << id << std::endl; + load(id); + } + return id; + } + + /* + Writes the state of all experiments if their history is size 3000 or larger. + */ + void writeHistoryAll() + { + if (experiments.size() == 0) + return; + + auto it = experiments.begin(); + while(it != experiments.end()) + { + auto history = (*it).second.getHistory(); + if (history.historySize() > 3000 || (*it).second.isFinished()) + write((*it).first); + + if ((*it).second.isFinished()) + { + std::cout << "Finished simulation." << std::endl; + it = experiments.erase(it); + } + else + { + ++it; + } + } + } + + /* + Writes the state of the given simulation to the database. + */ + void write(int id) + { + std::cout << "Writing batch." << std::endl; + database.startTransaction(); + database.writeExperimentHistory(experiments.at(id)); + database.endTransaction(); + auto history = experiments.at(id).getHistory(); + history.clearHistory(); + std::cout << "Finished writing batch." << std::endl; + } + + /* + Ticks each simulation once. + */ + void tickAll() + { + for (std::pair<const int, Experiment>& s : experiments) + s.second.tick(); + } + + /* + Ticks the given simulation once. + */ + void tick(int simulationId) + { + experiments.at(simulationId).tick(); + } + + /* + Returns true if all experiments are finished. + */ + bool hasSimulations() const + { + return experiments.size() != 0; + } + + /* + Saves the state of all workloads to the history. + */ + void saveStateAll() + { + for (auto& pair : experiments) + pair.second.saveState(); + } + + private: + // The database to write results to. + Database::Database database; + + // The list of experiments. + std::unordered_map<int, Experiment> experiments; + }; +} diff --git a/Simulator/include/database/Database.h b/Simulator/include/database/Database.h new file mode 100644 index 00000000..6e8bfeef --- /dev/null +++ b/Simulator/include/database/Database.h @@ -0,0 +1,74 @@ +#pragma once +#include "simulation/Section.h" +#include "modeling/ModelingTypes.h" + +#include <sqlite3.h> +#include "simulation/Experiment.h" + +namespace Database +{ + /* + The Database class provides a wrapper for the sqlite interface. + */ + class Database + { + public: + /* + Initializes a database with the given name. If it does not yet exist is creates a $name.db file. + */ + explicit Database(char* name); + + /* + Closes the database connection. + */ + ~Database(); + + /* + Starts a sqlite transaction. + */ + void startTransaction() const; + + /* + Ends a sqlite transaction. + */ + void endTransaction() const; + + /* + Writes the history of the experiment to the database. + */ + void writeExperimentHistory(Simulation::Experiment& simulation) const; + + /* + Polls the database for new simulation sections to simulate. + If there are no rows in the table, this returns -1. + */ + int pollQueuedExperiments() const; + + /* + Removes a row of the queued simulation sections. + */ + void dequeueExperiment(int id) const; + + + /* + Creates a simulation object from a simulation in the database. + */ + Simulation::Experiment createExperiment(uint32_t id); + + private: + /* + Sets the scheduler of the datacenter + */ + Simulation::Scheduler* loadScheduler(uint32_t simulationSectionId) const; + + DefaultDatacenter loadDatacenter(uint32_t datacenterId) const; + + /* + Fills the datacenter with workloads from the database. + */ + Simulation::WorkloadPool loadWorkloads(uint32_t traceId) const; + + // The sqlite db connection. + sqlite3 *db; + }; +} diff --git a/Simulator/include/database/Queries.h b/Simulator/include/database/Queries.h new file mode 100644 index 00000000..73afc1a1 --- /dev/null +++ b/Simulator/include/database/Queries.h @@ -0,0 +1,131 @@ +#pragma once +#include "Query.h" + +namespace Database +{ + namespace Queries + { + Query<int> GET_QUEUED_EXPERIMENTS(std::string(R"query( + SELECT experiment_id FROM queued_experiments; + )query")); + + Query<> REMOVE_QUEUED_EXPERIMENT(std::string(R"query( + DELETE FROM queued_experiments WHERE experiment_id = $id; + )query")); + + Query<int, int, int, int, std::string, std::string> GET_EXPERIMENT_BY_ID(std::string(R"query( + SELECT id, simulation_id, path_id, trace_id, scheduler_name, name FROM experiments WHERE id = $id; + )query")); + + Query<int, int, std::string, std::string> GET_PATH_BY_ID(std::string(R"query( + SELECT id, simulation_id, name, datetime_created FROM paths WHERE id = $id; + )query")); + + Query<int, int, int, int> GET_SECTION_BY_PATH_ID(std::string(R"query( + SELECT id, path_id, datacenter_id, start_tick FROM sections WHERE path_id = $id; + )query")); + + + /* + Returns the type of the scheduler of the given simulation section. + Returns: <std::string : scheduler_name> + Binds: <int : id> + */ + Query<std::string> GET_SCHEDULER_TYPE_OF_EXPERIMENT(std::string(R"query( + SELECT scheduler_name FROM experiments WHERE id = $id; + )query")); + + /* + Returns the id of the trace of the given simulation section. + Returns: <int : trace_id> + Binds: <int : id> + */ + Query<int> GET_TRACE_OF_EXPERIMENT(std::string(R"query( + SELECT trace_id FROM experiments WHERE id = $id; + )query")); + + /* + Returns all columns of each room belonging to the given datacenter. + Returns: <int : id, std::string : name, int : datacenter_id, std::string : type> + Binds: <int : datacenter_id> + */ + Query<int, std::string, int, std::string> GET_ROOMS_OF_DATACENTER(std::string(R"query( + SELECT * FROM rooms WHERE datacenter_id = $id; + )query")); + + /* + Returns all columns of each rack belonging to the given room. + Returns: <int : id, std::string : name, int : capacity> + Binds: <int : tile.room_id> + */ + Query<int, std::string, int> GET_RACKS_OF_ROOM(std::string(R"query( + SELECT racks.* FROM tiles, objects, racks + WHERE objects.id = tiles.object_id + AND objects.id = racks.id + AND tiles.room_id = $id; + )query")); + + /* + Returns the machine in a given rack. + Returns: <int : id, int : position> + Binds: <int : rack_id> + */ + Query<int, int> GET_MACHINES_OF_RACK(std::string(R"query( + SELECT id, position FROM machines + WHERE rack_id = $rid; + )query")); + + /* + Returns all columns of each task belonging to the given trace. + Returns: <int : id, int : start_tick, inn : total_flop_count, int : trace_id, int : task_dependency_id> + Binds: <int : trace_id> + */ + Query<int, int, int, int, int> GET_TASKS_OF_TRACE(std::string(R"query( + SELECT * FROM tasks WHERE trace_id = $id; + )query")); + + /* + Returns the information of each cpu in the given rack, and their corresponding machine. + Returns: <int : slot, int : machine_speed, int : cores, int : energy_consumption, int : failure_model_id> + Binds: <int : machine.rack_id> + */ + Query<int, int, int, int, int> GET_CPUS_IN_RACK(std::string(R"query( + SELECT machines.position AS slot, cpus.clock_rate_mhz AS machine_speed, cpus.number_of_cores AS cores, cpus.energy_consumption_w AS energy_consumption, cpus.failure_model_id AS failure_model_id FROM cpus, machine_cpus, machines + WHERE machine_cpus.cpu_id = cpus.id + AND machine_cpus.machine_id = machines.id + AND machines.rack_id = $id; + )query")); + + /* + Returns the information of each gpu in the given rack, and their corresponding machine. + Returns: <int : slot, int : machine_speed, int : cores, int : energy_consumption, int : failure_model_id> + Binds: <int : machine.rack_id> + */ + Query<int, int, int, int, int> GET_GPUS_IN_RACK(std::string(R"query( + SELECT machines.position AS slot, gpus.clock_rate_mhz AS speed, gpus.number_of_cores AS cores, gpus.energy_consumption_w AS energy_consumption, gpus.failure_model_id AS failure_model_id FROM gpus, machine_gpus, machines + WHERE machine_gpus.gpu_id = gpus.id + AND machine_gpus.machine_id = machines.id + AND machines.rack_id = $id; + )query")); + + /* + Inserts the state of a workload into the task_state table. + Returns: <> + Binds: <int : task_id, int : experiment_id, int : tick, int : flops_left> + */ + Query<> WRITE_WORKLOAD_STATE(std::string(R"query( + INSERT INTO task_states (task_id, experiment_id, tick, flops_left) + VALUES ($tid, $ssid, $tick, $flops); + )query")); + + /* + Inserts the state of a machine into the machine_state table. + Returns: <> + Binds: <int : task_id, int : machine_id, int : experiment_id, int : tick, float : temperature_c, int : in_use_memory_mb, float : load_fraction> + */ + Query<> WRITE_MACHINE_STATE(std::string(R"query( + INSERT INTO machine_states (task_id, machine_id, experiment_id, tick, temperature_c, in_use_memory_mb, load_fraction) + VALUES ($tid, $mid, $ssid, $tick, $temp, $mem, $load); + )query")); + } +} diff --git a/Simulator/include/database/Query.h b/Simulator/include/database/Query.h new file mode 100644 index 00000000..46ce0ee2 --- /dev/null +++ b/Simulator/include/database/Query.h @@ -0,0 +1,124 @@ +#pragma once +#include <assert.h> +#include <sqlite3.h> + +namespace Database +{ + + namespace Specializations + { + template<typename ReturnType> + ReturnType getResult(int location, sqlite3_stmt* statement); + + template<> + inline int getResult<int>(int location, sqlite3_stmt* statement) + { + return sqlite3_column_int(statement, location); + } + + template<> + inline std::string getResult<std::string>(int location, sqlite3_stmt* statement) + { + return std::string(reinterpret_cast<const char*>(sqlite3_column_text(statement, location))); + } + + template<typename ValueType> + void bind(ValueType value, int location, sqlite3_stmt* statement); + + template<> + inline void bind<int>(int value, int location, sqlite3_stmt* statement) + { + int rc = sqlite3_bind_int(statement, location, value); + assert(rc == SQLITE_OK); + } + + template<> + inline void bind<float>(float value, int location, sqlite3_stmt* statement) + { + int rc = sqlite3_bind_double(statement, location, static_cast<double>(value)); + assert(rc == SQLITE_OK); + } + } + + + + template<typename ...ReturnTypes> + class Query + { + public: + explicit Query(std::string query) : statement(nullptr), content(query) + {} + + /* + Calls sqlite3_finalize on the statement. + */ + ~Query() + { + int rc = sqlite3_finalize(statement); + assert(rc == SQLITE_OK); + } + + /* + Calls sqlite3_prepare_v2 to prepare this query. + */ + void prepare(sqlite3* db) + { + // Preparation of the statement. + int rc = sqlite3_prepare_v2(db, content.c_str(), static_cast<int>(content.size()), &statement, NULL); + assert(rc == SQLITE_OK); + } + + /* + Steps the execution of this query once. Returns true if the return code is SQLITE_ROW. + */ + bool step() const + { + // Execution of the statement + int rc = sqlite3_step(statement); + if(rc == SQLITE_ROW) + return true; + if(rc == SQLITE_DONE) + return false; + + assert(!"The return code of step was not SQLITE_ROW (100) or SQLITE_DONE (101)!"); + return false; + } + + /* + Resets this query back to its initial state. + */ + void reset() const + { + sqlite3_reset(statement); + } + + /* + A template for implementing the binding of values to parameters in the sqlite statement. + */ + template<typename ValueType> + void bind(ValueType value, int location) + { + Specializations::bind<ValueType>(value, location, statement); + } + + /** + * \brief Returns the result of ReturnType at the given location in the query result row. + * \tparam ReturnType The type of the entry in the row. + * \param location The index of the entry in the row. + * \return The result of the query at the given location. + */ + template<typename ReturnType> + ReturnType getResult(int location) + { + return Specializations::getResult<ReturnType>(location, statement); + } + + private: + // The sqlite3 statement that corresponds to this query. + sqlite3_stmt* statement; + // The sql string that will be executed. + std::string content; + + }; + +} diff --git a/Simulator/include/database/QueryExecuter.h b/Simulator/include/database/QueryExecuter.h new file mode 100644 index 00000000..d66f9e85 --- /dev/null +++ b/Simulator/include/database/QueryExecuter.h @@ -0,0 +1,155 @@ +#pragma once +#include "Query.h" +#include "QueryResult.h" + +#include <tuple> +#include <sqlite3.h> +#include <memory> +#include <vector> + +namespace Database +{ + template<typename ...ReturnTypes> + class QueryExecuter + { + public: + /* + Creates a prepared statement and initializes the query. + */ + explicit QueryExecuter(sqlite3* db) : database(db) {} + + /* + Sets the query this executer will execute. + */ + QueryExecuter<ReturnTypes...>& setQuery(Query<ReturnTypes...> query) + { + this->query = std::make_unique<Query<ReturnTypes...>>(query); + this->query->prepare(database); + return *this; + } + + /* + Binds the given name-value pairs to the statement. + Recursive case. + */ + template<typename BindType> + QueryExecuter<ReturnTypes...>& bindParams(BindType locationValuePair, int depth = 1) + { + query->template bind<BindType>(locationValuePair, depth); + return *this; + } + + /* + Binds the given name-value pairs to the statement. + Recursive case. + */ + template<typename BindType, typename ...BindTypes> + QueryExecuter<ReturnTypes...>& bindParams(BindType locationValuePair, BindTypes... locationValuePairs, int depth = 1) + { + query->template bind<BindType>(locationValuePair, depth); + bindParams<BindTypes...>(locationValuePairs..., depth + 1); + return *this; + } + + /* + Executes the query and returns a tuple with an entry for each type. Use this to recieve only the first result. + Multiple calls, or calls when there are no rows in the db, can lead to exceptions. + This is functionally equivalent to stepping and then calling getResult + */ + QueryResult<ReturnTypes...> executeOnce() + { + query->step(); + return QueryResult<ReturnTypes...>(getResult<ReturnTypes...>()); + } + + /* + Steps the query. + */ + bool step() + { + return query->step(); + } + + /* + Returns the result. + */ + QueryResult<ReturnTypes...> result() + { + return QueryResult<ReturnTypes...>(getResult<ReturnTypes...>()); + } + + /* + Executes the query and returns a vector of tuples for each result. + */ + std::vector<QueryResult<ReturnTypes...>> execute(int limit = 0) + { + std::vector<QueryResult<ReturnTypes...>> result; + + // Return code + bool more; + + int limiter = 0; + + do + { + // Execution of the statement + more = query->step(); + + if (!more || (limiter >= limit && limit > 0)) + break; + + limiter++; + std::tuple<ReturnTypes...> row = getResult<ReturnTypes...>(); + result.emplace_back(row); + + } while (more); + + return result; + } + + /* + Resets the sqlite3 query object. + */ + QueryExecuter<ReturnTypes...>& reset() + { + query->reset(); + return *this; + } + + private: + /* + Returns the results after executing the query. + Base case. + */ + template<typename ReturnType> + std::tuple<ReturnType> getResult(int depth = 0) + { + return std::tuple<ReturnType>(query->template getResult<ReturnType>(depth)); + } + + /* + Returns the results after executing the query. + Recursive Case. + */ + template<typename FirstReturnType, typename SecondReturnType, typename ...OtherReturnTypes> + std::tuple<FirstReturnType, SecondReturnType, OtherReturnTypes...> getResult(int depth = 0) + { + std::tuple<FirstReturnType> first = std::tuple<FirstReturnType>(query->template getResult<FirstReturnType>(depth)); + std::tuple<SecondReturnType, OtherReturnTypes...> rest = getResult<SecondReturnType, OtherReturnTypes...>(depth + 1); + return std::tuple_cat(first, rest); + } + + /* + Returns an empty tuple for when there are no return values. + */ + template<typename ...NoTypes> + std::tuple<> getResult(int depth = 0) const + { + return std::tuple<>(); + } + + std::unique_ptr<Query<ReturnTypes...>> query; + sqlite3* database; + }; +} + diff --git a/Simulator/include/database/QueryResult.h b/Simulator/include/database/QueryResult.h new file mode 100644 index 00000000..c1534be3 --- /dev/null +++ b/Simulator/include/database/QueryResult.h @@ -0,0 +1,25 @@ +#pragma once +#include <tuple> + +namespace Database +{ + template<class ...ReturnTypes> + class QueryResult + { + public: + explicit QueryResult(ReturnTypes... returnValues) : values(returnValues...) {} + explicit QueryResult(std::tuple<ReturnTypes...> returnValues) : values(returnValues) {} + + /* + Returns the item at the given index. + ReturnType must be the same as the type of the item at position Index in the tuple. + */ + template<class ReturnType, int Index> + ReturnType get() + { + return std::get<Index>(values); + } + + std::tuple<ReturnTypes...> values; + }; +} diff --git a/Simulator/include/modeling/Datacenter.h b/Simulator/include/modeling/Datacenter.h new file mode 100644 index 00000000..a9558f0a --- /dev/null +++ b/Simulator/include/modeling/Datacenter.h @@ -0,0 +1,40 @@ +#pragma once +#include "modeling/Room.h" +#include "simulation/schedulers/Scheduler.h" +#include "modeling/TypeIndex.h" + +#include <vector> + +namespace Modeling +{ + /* + The Datacenter class models a datacenter with rooms/entities. + */ + template<typename ...RoomTypes> + class Datacenter + { + public: + /* + Returns a reference to the vector of rooms in this datacenter. + */ + template<typename RoomType> + std::vector<RoomType>& getRoomsOfType() + { + return std::get<indexOfType<RoomType, RoomTypes...>::value>(rooms); + } + + /* + Adds a room to this datacenter. + */ + template<typename RoomType> + void addRoomOfType(RoomType& room) + { + std::get<indexOfType<RoomType, RoomTypes...>::value>(rooms).push_back(std::move(room)); + } + + + private: + // A vector of rooms that are part of this datacenter. + std::tuple<std::vector<RoomTypes>...> rooms; + }; +} diff --git a/Simulator/include/modeling/Entity.h b/Simulator/include/modeling/Entity.h new file mode 100644 index 00000000..c8c5a7cd --- /dev/null +++ b/Simulator/include/modeling/Entity.h @@ -0,0 +1,12 @@ +#pragma once +namespace Modeling +{ + class Entity + { + public: + explicit Entity(int id); + + // The id of this entity in the database + int id; + }; +} diff --git a/Simulator/include/modeling/ModelingTypes.h b/Simulator/include/modeling/ModelingTypes.h new file mode 100644 index 00000000..611a3653 --- /dev/null +++ b/Simulator/include/modeling/ModelingTypes.h @@ -0,0 +1,7 @@ +#pragma once + +// Define a DefaultDC type, capable of holding server rooms. +using DefaultDatacenter = Modeling::Datacenter<Modeling::ServerRoom, Modeling::Hallway, Modeling::PowerRoom>; + +// Define a type of simulation, capable of simulating the DefaultDC. +using DefaultSection = Simulation::Section<DefaultDatacenter>;
\ No newline at end of file diff --git a/Simulator/include/modeling/Rack.h b/Simulator/include/modeling/Rack.h new file mode 100644 index 00000000..7e5638ef --- /dev/null +++ b/Simulator/include/modeling/Rack.h @@ -0,0 +1,33 @@ +#pragma once +#include "modeling/Entity.h" +#include "modeling/machine/Machine.h" + +#include <unordered_map> + +namespace Modeling +{ + /* + The Rack class models a physical rack. It holds a vector of machines. + */ + class Rack : public Entity + { + public: + /* + Initializes the rack with the given machines. + */ + Rack(int id, std::unordered_map<uint32_t, Machine> machines); + + /* + Returns all machines in this rack. + */ + std::unordered_map<uint32_t, Machine>& getMachines(); + + /* + Returns the machine at the given slot. + */ + Machine& getMachineAtSlot(int slot); + + private: + std::unordered_map<uint32_t, Machine> machines; + }; +} diff --git a/Simulator/include/modeling/Room.h b/Simulator/include/modeling/Room.h new file mode 100644 index 00000000..a57b045e --- /dev/null +++ b/Simulator/include/modeling/Room.h @@ -0,0 +1,52 @@ +#pragma once +#include "modeling/Rack.h" +#include "modeling/TypeIndex.h" + +#include <vector> + +namespace Modeling +{ + /* + The Room class models the rooms that can be created in the simulation. It contains a list of all entities in the room. + */ + template<typename ...EntityTypes> + class Room + { + //static_assert(std::is_base_of<Entity, EntityTypes>..., "Each type must be derived from Entity!"); + public: + /* + Initializes the room with the given name. + */ + explicit Room(int id) : id(id) {} + + /* + Adds the entity to the list of entities in this room. + */ + template<typename EntityType> + void addEntity(EntityType& e) + { + std::get<indexOfType<EntityType, EntityTypes...>::value>(entities).push_back(e); + } + + /* + Returns all entities of the given type. + */ + template<typename EntityType> + std::vector<EntityType>& getEntitiesOfType() + { + return std::get<indexOfType<EntityType, EntityTypes...>::value>(entities); + } + + // The id of this room corresponding to its id in the database. + const int id; + + private: + // A vector for each type of entity + std::tuple<std::vector<EntityTypes>...> entities; + }; + + using ServerRoom = Room<Modeling::Rack>; + using Hallway = Room<>; + using PowerRoom = Room<>; + +} diff --git a/Simulator/include/modeling/TypeIndex.h b/Simulator/include/modeling/TypeIndex.h new file mode 100644 index 00000000..6fcda550 --- /dev/null +++ b/Simulator/include/modeling/TypeIndex.h @@ -0,0 +1,9 @@ +#pragma once +template<typename T, typename... Ts> struct indexOfType; + +template <typename T, typename... Ts> +struct indexOfType<T, T, Ts...> : std::integral_constant<std::size_t, 0> {}; + +template <typename T, typename Tail, typename... Ts> +struct indexOfType<T, Tail, Ts...> : std::integral_constant<std::size_t, 1 + indexOfType<T, Ts...>::value> {}; + diff --git a/Simulator/include/modeling/machine/CPU.h b/Simulator/include/modeling/machine/CPU.h new file mode 100644 index 00000000..dce4d2c5 --- /dev/null +++ b/Simulator/include/modeling/machine/CPU.h @@ -0,0 +1,34 @@ +#pragma once + +namespace Modeling +{ + class CPU + { + public: + CPU(int speed, int cores, int energyConsumption, int failureModelId); + + /* + Returns the speed of this CPU. + */ + int getSpeed(); + + /* + Returns the nr of cores of this CPU. + */ + int getCores(); + + /* + Returns the energy consumed by this CPU. + */ + int getEnergyConsumption(); + + /* + Returns the failure model id of this CPU. + */ + int getFailureModelId(); + + + private: + int speed, cores, energyConsumption, failureModelId; + }; +} diff --git a/Simulator/include/modeling/machine/GPU.h b/Simulator/include/modeling/machine/GPU.h new file mode 100644 index 00000000..049b928e --- /dev/null +++ b/Simulator/include/modeling/machine/GPU.h @@ -0,0 +1,33 @@ +#pragma once + +namespace Modeling +{ + class GPU + { + public: + GPU(int speed, int cores, int energyConsumption, int failureModelId); + + /* + Returns the speed of this CPU. + */ + int getSpeed(); + + /* + Returns the nr of cores of this CPU. + */ + int getCores(); + + /* + Returns the energy consumed by this CPU. + */ + int getEnergyConsumption(); + + /* + Returns the failure model id of this CPU. + */ + int getFailureModelId(); + + private: + int speed, cores, energyConsumption, failureModelId; + }; +} diff --git a/Simulator/include/modeling/machine/Machine.h b/Simulator/include/modeling/machine/Machine.h new file mode 100644 index 00000000..c89d32d1 --- /dev/null +++ b/Simulator/include/modeling/machine/Machine.h @@ -0,0 +1,112 @@ +#pragma once +#include "simulation/workloads/Workload.h" +#include "modeling/machine/CPU.h" +#include "modeling/machine/GPU.h" + +#include <stdint.h> +#include <vector> +#include <memory> + +namespace Modeling +{ + // Defines the initial temperature of machine + constexpr float ROOM_TEMPERATURE_CELCIUS = 23.0f; + + // Defines the usage of memory by the kernel + constexpr uint32_t KERNEL_MEMORY_USAGE_MB = 50; + + /* + The Machine class models a physical machine in a rack. It has a speed, and can be given a workload on which it will work until finished or interrupted. + */ + class Machine + { + public: + /* + Initializes the machine as idle with the given speed. + */ + Machine(int id); + + /* + Adds a cpu to the list of this machine. + */ + void addCPU(CPU cpu); + + /* + Adds a cpu to the list of this machine. + */ + void addGPU(GPU gpu); + + /* + Gives the task to this machine. If the machine is already busy this does nothing. + */ + void giveTask(Simulation::Workload* workload); + + /* + Returns true if the machine is busy. + */ + bool isBusy() const; + + /* + Does work on the given task and updates temperature and load appropriately. + */ + void work(); + + /* + Returns the id of the current workload of this machine. + */ + int getWorkloadId() const; + + /* + Returns the id of this machine. + */ + int getId() const; + + /* + Returns the temperature of this machine. + */ + float getTemperature() const; + + /* + Returns the memory used by this machine. + */ + int getMemory() const; + + /* + Returns the load fraction on this machine. + */ + float getLoad() const; + + private: + // A list of cpus in this machine. + std::vector<CPU> cpus; + + // A list of gpus in this machine. + std::vector<GPU> gpus; + + // True if the machine is working on a task. + bool busy = false; + + // The current workload the machine is working on. + Simulation::Workload* currentWorkload; + + // Db id of this machine. + int id; + + // Temperature of this machine. + float temperature = ROOM_TEMPERATURE_CELCIUS; + float maxTemperature = 80.0f; + float minTemperature = 0.0f; + float temperatureIncrease = 10.f; + + // Memory used by this machine. + int memory = KERNEL_MEMORY_USAGE_MB; + + // The fraction of load on this machine. + float load = 0.0f; + + /* + Returns the speed of the machine. + */ + uint32_t getSpeed(); + }; +} diff --git a/Simulator/include/simulation/Experiment.h b/Simulator/include/simulation/Experiment.h new file mode 100644 index 00000000..69c192fa --- /dev/null +++ b/Simulator/include/simulation/Experiment.h @@ -0,0 +1,179 @@ +#pragma once +#include "Path.h" +#include <algorithm> +#include "workloads/WorkloadPool.h" + +namespace Simulation +{ + /** + * \brief Holds a Path, Scheduler, and WorkloadPool together to form a single unit that can be simulated. + */ + class Experiment + { + public: + /** + * \brief Instantiates a new, complete, experiment that starts at tick 0 and can be simulated. + * \param path The path this experiment should simulate. + * \param scheduler The scheduler this experiment should use for workload balancing. + * \param pool The workloadPool that contains the workloads of this experiment. + * \param id The id of this experiment as it is in the database. + */ + Experiment(Path path, Scheduler* scheduler, WorkloadPool pool, uint32_t id) : path(path), scheduler(scheduler), id(id), currentTick(0), workloadPool(pool) + {} + + /** + * \brief Simulates a single tick of this experiment. + */ + void tick() + { + if(finished) return; + + workloadPool.clearFinishedWorkloads(); + + auto machineAccumulator = path.getCurrentSection(currentTick).getMachines(); + + // Schedule the workload over each machine + scheduler->schedule(machineAccumulator, workloadPool.getWorkloads(currentTick)); + + // Update each machine + std::for_each( + machineAccumulator.begin(), + machineAccumulator.end(), + [this](const std::reference_wrapper<Modeling::Machine>& machineWrapper) { + machineWrapper.get().work(); + } + ); + + currentTick++; + + if(workloadPool.isEmpty()) finished = true; + } + + /** + * \brief Saves the state of the simulation, adding it to the history. + */ + void saveState() + { + for(Workload* workload : workloadPool.getWorkloads(currentTick)) + { + history.addSnapshot( + currentTick, + WorkloadSnapshot( + workload->getId(), + workload->getRemainingOperations() + ) + ); + } + + for(std::reference_wrapper<Modeling::Machine> machineref : path.getCurrentSection(currentTick).getMachines()) + { + auto machine = machineref.get(); + history.addSnapshot( + currentTick, + MachineSnapshot( + machine.getId(), + machine.getWorkloadId(), + machine.getTemperature(), + machine.getLoad(), + machine.getMemory() + ) + ); + } + } + + /** + * \brief Adds the given workload to the pool of workloads of this simulation. + * \param wl The workload to add to the simulator of this experiment. + */ + void addWorkload(Workload& wl) + { + workloadPool.addWorkload(wl); + } + + /** + * \return A reference to the workloads of this simulation. + */ + WorkloadPool& getWorkloadPool() + { + return workloadPool; + } + + /** + * \return The current tick which is being simulated, i.e. the number of ticks that have passed. + */ + uint32_t getCurrentTick() const + { + return currentTick; + } + + /** + * \return The history of this experiment that has no yet been written to the database. + */ + SimulationHistory getHistory() const + { + return history; + } + + /** + * \return The id of this experiment as it is in the database. + */ + uint32_t getId() const + { + return id; + } + + /** + * \brief Sets this experiment to finished. After calling this method, + * the tick() method will have no effect. + */ + void end() + { + this->finished = true; + } + + /** + * \return True if the experiment is finished, i.e. when all workloads have been completed. + */ + bool isFinished() const + { + return this->finished; + } + + private: + /** + * \brief The path of this experiment which contains the sections and when they should be used. + */ + Path path; + + /** + * \brief The scheduler that this used for workload balancing. + */ + std::shared_ptr<Scheduler> scheduler; + + /** + * \brief The id of this experiment as it is in the database. + */ + uint32_t id; + + /** + * \brief The number of ticks that have passed. + */ + uint32_t currentTick; + + /** + * \brief The pool of workloads in this simulation, to be distributed by the scheduler. + */ + WorkloadPool workloadPool; + + /** + * \brief The part of the history of this simulation which has not been written to the database. + */ + SimulationHistory history; + + /** + * \brief If this is true, then tick will not do anything. This indicates that the simulation is finished, + * and that its history should be written to disk. + */ + bool finished = false; + }; +} diff --git a/Simulator/include/simulation/Path.h b/Simulator/include/simulation/Path.h new file mode 100644 index 00000000..d35d49fc --- /dev/null +++ b/Simulator/include/simulation/Path.h @@ -0,0 +1,63 @@ +#pragma once +#include "Section.h" +#include "modeling/ModelingTypes.h" + +namespace Simulation +{ + /** + * \brief Holds all sections of the parent experiment, and returns the correct one + * based on the current tick. + */ + class Path + { + public: + explicit Path(int id) : id(id) + {} + + + /** + * \brief Adds the given section to this path. The begin tick of this section + * should not already be in use by one of the other sections in this path. + * \param section The section to add to this path. + */ + void addSection(DefaultSection section) + { + sections.push_back(section); + } + + /** + * \brief Returns the section that is currently in use by taking the section + * that has the greatest begin tick smaller than the current tick + * \param currentTick The tick the simulator is simulating right now. + * \return The section that is currently in use. + */ + DefaultSection& getCurrentSection(uint32_t currentTick) + { + size_t currentSection = 0; + + uint32_t currentStartTick = 0; + for(int i = 0; i < sections.size(); ++i) + { + uint32_t tempStartTick = sections.at(i).getStartTick(); + if(tempStartTick > currentStartTick && tempStartTick < currentTick) + currentSection = i; + } + + return sections.at(currentSection); + } + + private: + + /** + * \brief The unordered vector of sections in this path. No pair of sections + * should share the same begin tick. + */ + std::vector<DefaultSection> sections; + + + /** + * \brief The id of this path as it is in the database. + */ + int id; + }; +} diff --git a/Simulator/include/simulation/Section.h b/Simulator/include/simulation/Section.h new file mode 100644 index 00000000..3c11b073 --- /dev/null +++ b/Simulator/include/simulation/Section.h @@ -0,0 +1,76 @@ +#pragma once +#include "modeling/Datacenter.h" +#include "modeling/Room.h" +#include "simulation/history/SimulationHistory.h" + +#include <vector> +#include <iterator> + +namespace Simulation +{ + /** + * \brief Holds a datacenter and the tick on which the parent experiment should switch to this section. + * \tparam DatacenterType The type of datacenter to be used. + */ + template<typename DatacenterType> + class Section + { + public: + /** + * \brief Initializes the datacenter in the simulation. Sets paused to false and finished to false. + * \param dc The topology of this section. + * \param startTick The tick on which the experiment should start using the topology of this section. + */ + Section(DatacenterType& dc, uint32_t startTick) : datacenter(dc), startTick(startTick) + {} + + /** + * \return A reference to the datacenter of this section. + */ + DatacenterType& getDatacenter() + { + return datacenter; + } + + /** + * \return All machines in the datacenter of section. + */ + std::vector<std::reference_wrapper<Modeling::Machine>> getMachines() + { + using namespace std; + + vector<reference_wrapper<Modeling::Machine>> machineAccumulator; + + // For each serverroom, we get the racks in the room + vector<Modeling::ServerRoom>& rooms = datacenter.template getRoomsOfType<Modeling::ServerRoom>(); + for(auto& room : rooms) + // For each rack get the machines inside that rack + for(auto& rack : room.getEntitiesOfType<Modeling::Rack>()) + // Add each machine to the accumulator + for(auto& machine : rack.getMachines()) + machineAccumulator.push_back(ref(machine.second)); + + return machineAccumulator; + } + + /** + * \return The tick on which the experiment should start using the topology of this section. + */ + uint32_t getStartTick() const + { + return startTick; + } + + private: + /** + * \brief The datacenter that is used for experiments. + */ + DatacenterType datacenter; + + /** + * \brief The tick when the next sections starts. This is -1 if this is the last section. + */ + uint32_t startTick; + }; + +} diff --git a/Simulator/include/simulation/history/History.h b/Simulator/include/simulation/history/History.h new file mode 100644 index 00000000..f1d826eb --- /dev/null +++ b/Simulator/include/simulation/history/History.h @@ -0,0 +1,43 @@ +#pragma once +#include <stdint.h> +#include <map> + +namespace Simulation { + template<typename Type> + class History { + public: + void addSnapshotAtTick(uint32_t tick, Type snapshot) + { + history.insert(std::make_pair(tick, snapshot)); + } + + const auto& snapshotsAtTick(uint32_t tick) + { + return history.equal_range(tick); + } + + typename std::unordered_map<uint32_t, Type>::const_iterator begin() + { + return history.begin(); + } + + typename std::unordered_map<uint32_t, Type>::const_iterator end() + { + return history.end(); + } + + void clear() + { + history.clear(); + } + + size_t size() + { + return history.size(); + } + + private: + // Maps ticks to histories of workloads + std::unordered_multimap<uint32_t, Type> history; + }; +}
\ No newline at end of file diff --git a/Simulator/include/simulation/history/MachineSnapshot.h b/Simulator/include/simulation/history/MachineSnapshot.h new file mode 100644 index 00000000..49ce1313 --- /dev/null +++ b/Simulator/include/simulation/history/MachineSnapshot.h @@ -0,0 +1,17 @@ +#pragma once + +namespace Simulation { + /* + POD class that represents the state of a machine. + */ + class MachineSnapshot { + public: + MachineSnapshot(int id, int currentWorkload, float temp, float load, uint32_t mem) : id(id), currentWorkload(currentWorkload), temperature(temp), loadFraction(load), usedMemory(mem) {} + + int id; + int currentWorkload; + float temperature; + float loadFraction; + uint32_t usedMemory; + }; +}
\ No newline at end of file diff --git a/Simulator/include/simulation/history/SimulationHistory.h b/Simulator/include/simulation/history/SimulationHistory.h new file mode 100644 index 00000000..f43968b7 --- /dev/null +++ b/Simulator/include/simulation/history/SimulationHistory.h @@ -0,0 +1,81 @@ +#pragma once +#include "History.h" +#include "WorkloadSnapshot.h" +#include "MachineSnapshot.h" + +#include <unordered_map> + +namespace Simulation +{ + using WorkloadHistory = History<WorkloadSnapshot>; + using MachineHistory = History<MachineSnapshot>; + using HistoryRef = std::tuple<std::reference_wrapper<WorkloadHistory>, std::reference_wrapper<MachineHistory>>; + + class SimulationHistory + { + public: + /* + Adds the workload snapshot at the given tick. + */ + void addSnapshot(uint32_t tick, WorkloadSnapshot snapshots) + { + workloadHistory.addSnapshotAtTick(tick, snapshots); + } + + /* + Adds the machine snapshot at the given tick. + */ + void addSnapshot(uint32_t tick, MachineSnapshot snapshots) + { + machineHistory.addSnapshotAtTick(tick, snapshots); + } + + /* + Returns the equal_range of the workload snapshots at the given tick. + */ + auto getWorkloadSnapshot(uint32_t tick) + { + return workloadHistory.snapshotsAtTick(tick); + } + + /* + Returns the equal_range of the machine snapshots at the given tick. + */ + auto getMachineSnapshot(uint32_t tick) + { + return machineHistory.snapshotsAtTick(tick); + } + + /* + Returns a const tuple ref of the entire cached history of machines and workloads. + */ + const HistoryRef getHistory() + { + return std::make_tuple( + std::ref(workloadHistory), + std::ref(machineHistory) + ); + } + + /* + Clears the cache of history. + */ + void clearHistory() + { + workloadHistory.clear(); + machineHistory.clear(); + } + + /* + Returns the number of snapshots that are in the history cache. + */ + size_t historySize() + { + return workloadHistory.size(); + } + + private: + WorkloadHistory workloadHistory; + MachineHistory machineHistory; + }; +}
\ No newline at end of file diff --git a/Simulator/include/simulation/history/WorkloadSnapshot.h b/Simulator/include/simulation/history/WorkloadSnapshot.h new file mode 100644 index 00000000..1e7e2695 --- /dev/null +++ b/Simulator/include/simulation/history/WorkloadSnapshot.h @@ -0,0 +1,13 @@ +#pragma once + +namespace Simulation +{ + class WorkloadSnapshot + { + public: + WorkloadSnapshot(uint32_t id, uint32_t flopsDone) : flopsDone(flopsDone), id(id) {} + + uint32_t flopsDone; + uint32_t id; + }; +}
\ No newline at end of file diff --git a/Simulator/include/simulation/schedulers/FirstInFirstOutScheduler.h b/Simulator/include/simulation/schedulers/FirstInFirstOutScheduler.h new file mode 100644 index 00000000..0cac0dfa --- /dev/null +++ b/Simulator/include/simulation/schedulers/FirstInFirstOutScheduler.h @@ -0,0 +1,37 @@ +#pragma once +#include "Scheduler.h" +#include <algorithm> + +namespace Simulation +{ + class FirstInFirstOutScheduler : public Scheduler + { + protected: + ~FirstInFirstOutScheduler() + { + } + + public: + /* + Distribute workloads according to the FIFO principle + */ + void schedule(std::vector<std::reference_wrapper<Modeling::Machine>>& machines, std::vector<Workload*> workloads) override + { + if (workloads.size() == 0) + return; + + // Find the first workload with dependencies finished + int index = 0; + while(!workloads.at(index)->dependencyFinished) + index = (++index) % workloads.size(); + + std::for_each( + machines.begin(), + machines.end(), + [index, &workloads](std::reference_wrapper<Modeling::Machine>& machine) { + machine.get().giveTask(workloads.at(index)); + } + ); + } + }; +} diff --git a/Simulator/include/simulation/schedulers/Scheduler.h b/Simulator/include/simulation/schedulers/Scheduler.h new file mode 100644 index 00000000..b084e8f6 --- /dev/null +++ b/Simulator/include/simulation/schedulers/Scheduler.h @@ -0,0 +1,25 @@ +#pragma once +#include "simulation/workloads/Workload.h" +#include "modeling/machine/Machine.h" + +#include <vector> + +namespace Simulation +{ + /* + Provides a strategy for load balancing. + */ + class Scheduler + { + public: + virtual ~Scheduler() + { + + } + + /* + Divides the workloads over the given machines. + */ + virtual void schedule(std::vector<std::reference_wrapper<Modeling::Machine>>& machines, std::vector<Workload*> workloads) = 0; + }; +} diff --git a/Simulator/include/simulation/schedulers/ShortestRemainingTimeScheduler.h b/Simulator/include/simulation/schedulers/ShortestRemainingTimeScheduler.h new file mode 100644 index 00000000..15265985 --- /dev/null +++ b/Simulator/include/simulation/schedulers/ShortestRemainingTimeScheduler.h @@ -0,0 +1,46 @@ +#pragma once +#include "Scheduler.h" +#include <algorithm> + +namespace Simulation +{ + class ShortestRemainingTimeScheduler : public Scheduler + { + protected: + ~ShortestRemainingTimeScheduler() + { + } + + public: + /* + Distribute workloads according to the srtf principle + */ + void schedule(std::vector<std::reference_wrapper<Modeling::Machine>>& machines, std::vector<Workload*> workloads) override + { + if (workloads.size() == 0) + return; + + std::sort( + workloads.begin(), + workloads.end(), + [](Workload* a, Workload* b) -> bool { + return a->getRemainingOperations() < b->getRemainingOperations(); + } + ); + + int taskIndex = 0; + + std::for_each( + machines.begin(), + machines.end(), + [&workloads, &taskIndex](Modeling::Machine& machine) { + while (!workloads.at(taskIndex)->dependencyFinished) + taskIndex = (++taskIndex) % workloads.size(); + + machine.giveTask(workloads.at(taskIndex)); + taskIndex = (++taskIndex) % workloads.size(); + } + ); + } + }; +} diff --git a/Simulator/include/simulation/workloads/Workload.h b/Simulator/include/simulation/workloads/Workload.h new file mode 100644 index 00000000..9de57990 --- /dev/null +++ b/Simulator/include/simulation/workloads/Workload.h @@ -0,0 +1,80 @@ +#pragma once +#include <stdint.h> + +namespace Simulation +{ + /* + The Workload class models a workload. + */ + class Workload + { + public: + /* + Initializes the TOTAL_FLOPS and the remainingFlops to the size. + */ + Workload(int size, int startTick, int dbId, int traceId, int dependency); + + /* + Decreases the remainingFlops by the given amount. + */ + void doOperations(uint32_t opCount); + + /* + Returns the amount of operations left to do. + */ + uint32_t getRemainingOperations() const; + + /* + Returns the total amount of operations, including finished ones. + */ + uint32_t getTotalOperations() const; + + /* + Returns true if the workload has been finished. + */ + bool isFinished() const; + + /* + Returns the id of this workload. + */ + uint32_t getId() const; + + /* + Returns the dependency id of this workload. + */ + int getDependencyId() const; + + /** + * \return The start tick of this workload. + */ + uint32_t getStartTick() const + { + return START_TICK; + } + + // True if the dependency of this workload has finished. + bool dependencyFinished = false; + + private: + // The id of the workload this workload depends on. + int dependencyId; + + // Finished is true if the remainingFlops is 0. + bool finished = false; + + // The amount of operations done. + uint32_t remainingFlops; + + // The total amount of operations required to finish this task. + uint32_t TOTAL_FLOPS; + + // The tick during which this workload was started. + uint32_t START_TICK; + + // The id of this workload in the database + uint32_t ID; + + // The id of the trace this workload belongs to in the database. + uint32_t TRACE_ID; + }; +} diff --git a/Simulator/include/simulation/workloads/WorkloadPool.h b/Simulator/include/simulation/workloads/WorkloadPool.h new file mode 100644 index 00000000..28a2ad04 --- /dev/null +++ b/Simulator/include/simulation/workloads/WorkloadPool.h @@ -0,0 +1,43 @@ +#pragma once +#include "simulation/workloads/Workload.h" +#include <vector> + +namespace Simulation +{ + class WorkloadPool + { + public: + /* + Adds the given workload to this pool of workloads. + */ + void addWorkload(Workload w); + + /* + Returns a reference to the vector of workloads. + */ + std::vector<Workload*> getWorkloads(uint32_t currentTick); + + /* + Returns a reference to the workload with the given id. + */ + Workload& getWorkload(int id); + + /* + Removes all workloads that are finished. + */ + void clearFinishedWorkloads(); + + /* + Returns true if the workloads vector of this pool is empty. + */ + bool isEmpty(); + + private: + /* + Sets all dependencyFinished to true of workloads with the given id as dependency. + */ + void setDependenciesFinished(int id); + + std::vector<Workload> workloads; + }; +} diff --git a/Simulator/makefile b/Simulator/makefile new file mode 100644 index 00000000..55cea72e --- /dev/null +++ b/Simulator/makefile @@ -0,0 +1,17 @@ +CC=g++ +CFLAGS=-std=c++14 -Iinclude -ldl -lpthread +SOURCE=\ +external/sqlite3.o\ +src/Simulator.cpp\ +src/database/Database.cpp \ +src/simulation/workloads/Workload.cpp\ +src/simulation/workloads/WorkloadPool.cpp\ +src/modeling/machine/CPU.cpp\ +src/modeling/machine/GPU.cpp\ +src/modeling/machine/Machine.cpp\ +src/modeling/Entity.cpp\ +src/modeling/Rack.cpp + + +simulatormake: + $(CC) -o simulator $(SOURCE) $(CFLAGS) diff --git a/Simulator/src/Simulator.cpp b/Simulator/src/Simulator.cpp new file mode 100644 index 00000000..fe963e0c --- /dev/null +++ b/Simulator/src/Simulator.cpp @@ -0,0 +1,51 @@ +#include "Simulator.h" +#include "modeling/ModelingTypes.h" + +#include <iostream> +#include <chrono> +#include <thread> +#include <cassert> + +int main(int argc, char* argv[]) +{ + assert(argc == 2); + + // The main simulator, responsible for updating and writing away each simulation. + Simulation::Simulator<DefaultSection> simulator(argv[1]); + + // Timer used for polling only once every 5 seconds + auto pollTimer = std::chrono::high_resolution_clock::now() - std::chrono::seconds(5); + + while (true) + { + auto now = std::chrono::high_resolution_clock::now(); + + // Calculate the time since the last polling + std::chrono::duration<double> diff = now - pollTimer; + if (diff.count() > 5) // Every five seconds, poll and load + { + // Poll and load all experiments queued in the database + simulator.pollAndLoadAll(); + // Reset the timer for polling + pollTimer = std::chrono::high_resolution_clock::now(); + } + + if (simulator.hasSimulations()) + { + // Update each simulation + simulator.tickAll(); + // Save the state of each simulation + simulator.saveStateAll(); + // Write the history of each simulation when 500 states have been saved + simulator.writeHistoryAll(); + } + else // Wait for polling + { + std::chrono::duration<double> timeToSleep = std::chrono::seconds(5) - diff; + std::this_thread::sleep_for(diff); + } + } + + // Terminal pause, press key to exit + std::cin.get(); +} diff --git a/Simulator/src/database/Database.cpp b/Simulator/src/database/Database.cpp new file mode 100644 index 00000000..bb76abda --- /dev/null +++ b/Simulator/src/database/Database.cpp @@ -0,0 +1,286 @@ +#include "database/Database.h" +#include "database/Queries.h" +#include "database/QueryExecuter.h" + +#include "modeling/ModelingTypes.h" +#include "modeling/machine/CPU.h" + +#include "simulation/schedulers/ShortestRemainingTimeScheduler.h" + +#include <sqlite3.h> +#include <assert.h> +#include "simulation/Experiment.h" +#include "simulation/schedulers/FirstInFirstOutScheduler.h" + +namespace Database +{ + Database::Database(char* name) + { + int rc = sqlite3_open_v2(name, &db, SQLITE_OPEN_READWRITE, NULL); + assert(rc == SQLITE_OK); + } + + Database::~Database() + { + int rc = sqlite3_close_v2(db); + assert(rc == SQLITE_OK); + } + + void Database::startTransaction() const + { + sqlite3_exec(db, "BEGIN TRANSACTION;", NULL, NULL, NULL); + } + + void Database::endTransaction() const + { + sqlite3_exec(db, "END TRANSACTION;", NULL, NULL, NULL); + } + + void Database::writeExperimentHistory(Simulation::Experiment& experiment) const + { + auto history = experiment.getHistory(); + + auto workloadHistory = std::get<0>(history.getHistory()); + + QueryExecuter<> writeWorkloadStateQuery(db); + writeWorkloadStateQuery.setQuery(Queries::WRITE_WORKLOAD_STATE); + std::for_each(workloadHistory.get().begin(), workloadHistory.get().end(), [&](const auto& pair) { + uint32_t tick = pair.first; + Simulation::WorkloadSnapshot snapshot = pair.second; + + uint32_t id = snapshot.id; + uint32_t flopsDone = snapshot.flopsDone; + writeWorkloadStateQuery.reset() + .bindParams<int, int, int, int>(id, experiment.getId(), tick, flopsDone) + .executeOnce(); + }); + + auto machineHistory = std::get<1>(history.getHistory()); + + QueryExecuter<> writeMachineStateQuery(db); + writeMachineStateQuery.setQuery(Queries::WRITE_MACHINE_STATE); + + std::for_each(machineHistory.get().begin(), machineHistory.get().end(), [&](const auto& pair) { + uint32_t tick = pair.first; + Simulation::MachineSnapshot snapshot = pair.second; + + uint32_t id = snapshot.id; + uint32_t workloadId = snapshot.currentWorkload; + float temp = snapshot.temperature; + float load = snapshot.loadFraction; + + uint32_t mem = snapshot.usedMemory; + writeMachineStateQuery.reset() + .bindParams<int, int, int, int, float, int, float>(workloadId, id, experiment.getId(), tick, temp, mem, load) + .executeOnce(); + }); + + history.clearHistory(); + } + + int Database::pollQueuedExperiments() const + { + QueryExecuter<int> q(db); + q.setQuery(Queries::GET_QUEUED_EXPERIMENTS); + bool hasRow = q.step(); + if(hasRow) + return q.result().get<int, 0>(); + return -1; + } + + void Database::dequeueExperiment(int experimentId) const + { + QueryExecuter<> q(db); + q.setQuery(Queries::REMOVE_QUEUED_EXPERIMENT) + .bindParams<int>(experimentId) + .executeOnce(); + } + + Simulation::Experiment Database::createExperiment(uint32_t experimentId) + { + // Retrieves the experiment data by ID + QueryExecuter<int, int, int, int, std::string, std::string> q(db); + QueryResult<int, int, int, int, std::string, std::string> qres = q + .setQuery(Queries::GET_EXPERIMENT_BY_ID) + .bindParams<int>(experimentId) + .executeOnce(); + + // Sets the scheduler of the datacenter + Simulation::Scheduler* scheduler = loadScheduler(experimentId); + + int pathId = qres.get<int, 2>(); + Simulation::Path path = Simulation::Path(pathId); + + QueryExecuter<int, int, int, int> q2(db); + std::vector<QueryResult<int, int, int, int>> q2res = q2 + .setQuery(Queries::GET_SECTION_BY_PATH_ID) + .bindParams<int>(pathId) + .execute(); + + // Retrieve workloads of trace + Simulation::WorkloadPool pool = loadWorkloads(experimentId); + + std::for_each(q2res.begin(), q2res.end(), [&](QueryResult<int, int, int, int> r) { + int datacenterId = r.get<int, 2>(); + int startTick = r.get<int, 3>(); + DefaultDatacenter datacenter = loadDatacenter(datacenterId); + DefaultSection section(datacenter, startTick); + + path.addSection(section); + }); + + Simulation::Experiment experiment(path, scheduler, pool, experimentId); + + return experiment; + } + + Simulation::Scheduler* Database::loadScheduler(uint32_t experimentId) const + { + std::string name = QueryExecuter<std::string>(db) + .setQuery(Queries::GET_SCHEDULER_TYPE_OF_EXPERIMENT) + .bindParams<int>(experimentId) + .executeOnce() + .get<std::string, 0>(); + + // Retrieve scheduler + Simulation::Scheduler* scheduler = nullptr; + if(name == "DEFAULT") + scheduler = new Simulation::FirstInFirstOutScheduler(); + else if(name == "SRTF") // Shortest remaining time first + scheduler = new Simulation::ShortestRemainingTimeScheduler(); + else if(name == "FIFO") + scheduler = new Simulation::FirstInFirstOutScheduler(); + + assert(scheduler != nullptr); + return scheduler; + } + + DefaultDatacenter Database::loadDatacenter(uint32_t datacenterId) const + { + DefaultDatacenter datacenter; + + // Retrieves a vector of rooms of the datacenter + std::vector<QueryResult<int, std::string, int, std::string>> rooms = QueryExecuter<int, std::string, int, std::string>(db) + .setQuery(Queries::GET_ROOMS_OF_DATACENTER) + .bindParams<int>(datacenterId) + .execute(); + + // Get machines of rooms + for(auto& room : rooms) + { + int id = room.get<int, 0>(); + Modeling::ServerRoom serverRoom(id); + + // Retrieves the racks in the room + auto racks = QueryExecuter<int, std::string, int>(db) + .setQuery(Queries::GET_RACKS_OF_ROOM) + .bindParams<int>(id) + .execute(); + + for(auto& queryResult : racks) + { + int rackId = queryResult.get<int, 0>(); + + // Retrieves the machines in the rack + auto machinesResult = QueryExecuter<int, int>(db) + .setQuery(Queries::GET_MACHINES_OF_RACK) + .bindParams<int>(rackId) + .execute(); + + std::unordered_map<uint32_t, Modeling::Machine> machines; + for(auto& qr : machinesResult) + { + int position = qr.get<int, 1>(); + int machineId = qr.get<int, 0>(); + machines.emplace(position, Modeling::Machine(machineId)); + } + + Modeling::Rack rack(rackId, machines); + + // Retrieves the cpus in the rack + auto cpus = QueryExecuter<int, int, int, int, int>(db) + .setQuery(Queries::GET_CPUS_IN_RACK) + .bindParams<int>(rackId) + .execute(); + + for(auto& cpu : cpus) + { + int slot = cpu.get<int, 0>(); + int speed = cpu.get<int, 1>(); + int cores = cpu.get<int, 2>(); + int energyConsumption = cpu.get<int, 3>(); + int failureModelId = cpu.get<int, 4>(); + + rack.getMachineAtSlot(slot).addCPU(Modeling::CPU(speed, cores, energyConsumption, failureModelId)); + } + + // Retrieves the gpus in the rack + auto gpus = QueryExecuter<int, int, int, int, int>(db) + .setQuery(Queries::GET_GPUS_IN_RACK) + .bindParams<int>(rackId) + .execute(); + + for(auto& gpu : gpus) + { + int machineSlot = gpu.get<int, 0>(); + int speed = gpu.get<int, 1>(); + int cores = gpu.get<int, 2>(); + int energyConsumption = gpu.get<int, 3>(); + int failureModelId = gpu.get<int, 4>(); + + rack.getMachineAtSlot(machineSlot).addGPU(Modeling::GPU(speed, cores, energyConsumption, failureModelId)); + } + + serverRoom.addEntity<Modeling::Rack>(rack); + } + + datacenter.addRoomOfType<Modeling::ServerRoom>(serverRoom); + } + + return datacenter; + } + + Simulation::WorkloadPool Database::loadWorkloads(uint32_t simulationSectionId) const + { + Simulation::WorkloadPool pool; + + std::vector<QueryResult<int, int, int, int, int>> tasks; + // Fetch tasks from database + { + // Retrieves the traceId corresponding to the simulation section + QueryExecuter<int> q(db); + int traceId = q + .setQuery(Queries::GET_TRACE_OF_EXPERIMENT) + .bindParams<int>(simulationSectionId) + .executeOnce() + .get<int, 0>(); + + // Retrieves the tasks that belong to the traceId + QueryExecuter<int, int, int, int, int> q2(db); + tasks = q2 + .setQuery(Queries::GET_TASKS_OF_TRACE) + .bindParams<int>(traceId) + .execute(); + } + + // Create workloads from tasks + for(auto& row : tasks) + { + int id = row.get<int, 0>(); + int startTick = row.get<int, 1>(); + int totalFlopCount = row.get<int, 2>(); + int traceId = row.get<int, 3>(); + int dependency = row.get<int, 4>(); + + // TODO possibly wait and batch? + Simulation::Workload workload(totalFlopCount, startTick, id, traceId, dependency); + if(dependency == 0) + workload.dependencyFinished = true; + + pool.addWorkload(workload); + } + + return pool; + } +} + diff --git a/Simulator/src/modeling/Entity.cpp b/Simulator/src/modeling/Entity.cpp new file mode 100644 index 00000000..eb39222b --- /dev/null +++ b/Simulator/src/modeling/Entity.cpp @@ -0,0 +1,8 @@ +#include "modeling/Entity.h" + +namespace Modeling +{ + Entity::Entity(int id) : id(id) + { + } +} diff --git a/Simulator/src/modeling/Rack.cpp b/Simulator/src/modeling/Rack.cpp new file mode 100644 index 00000000..2b330abd --- /dev/null +++ b/Simulator/src/modeling/Rack.cpp @@ -0,0 +1,21 @@ +#include "modeling/Rack.h" + +#include <assert.h> +#include <iterator> + +namespace Modeling +{ + Rack::Rack(int id, std::unordered_map<uint32_t, Machine> machines) : Entity(id), machines(machines) {} + + std::unordered_map<uint32_t, Machine>& Rack::getMachines() + { + return machines; + } + + Machine& Rack::getMachineAtSlot(int slot) + { + assert(machines.find(slot) != machines.end()); + + return machines.at(slot); + } +} diff --git a/Simulator/src/modeling/machine/CPU.cpp b/Simulator/src/modeling/machine/CPU.cpp new file mode 100644 index 00000000..6167b133 --- /dev/null +++ b/Simulator/src/modeling/machine/CPU.cpp @@ -0,0 +1,26 @@ +#include "modeling/machine/CPU.h" + +namespace Modeling +{ + CPU::CPU(int speed, int cores, int energyConsumption, int failureModelId) : speed(speed), cores(cores), energyConsumption(energyConsumption), failureModelId(failureModelId) {} + + int CPU::getCores() + { + return this->cores; + } + + int CPU::getEnergyConsumption() + { + return this->energyConsumption; + } + + int CPU::getFailureModelId() + { + return this->failureModelId; + } + + int CPU::getSpeed() + { + return this->speed; + } +} diff --git a/Simulator/src/modeling/machine/GPU.cpp b/Simulator/src/modeling/machine/GPU.cpp new file mode 100644 index 00000000..8458925b --- /dev/null +++ b/Simulator/src/modeling/machine/GPU.cpp @@ -0,0 +1,26 @@ +#include "modeling/machine/GPU.h" + +namespace Modeling +{ + GPU::GPU(int speed, int cores, int energyConsumption, int failureModelId) : speed(speed), cores(cores), energyConsumption(energyConsumption), failureModelId(failureModelId) {} + + int GPU::getCores() + { + return this->cores; + } + + int GPU::getEnergyConsumption() + { + return this->energyConsumption; + } + + int GPU::getFailureModelId() + { + return this->failureModelId; + } + + int GPU::getSpeed() + { + return this->speed; + } +} diff --git a/Simulator/src/modeling/machine/Machine.cpp b/Simulator/src/modeling/machine/Machine.cpp new file mode 100644 index 00000000..d7d4fac7 --- /dev/null +++ b/Simulator/src/modeling/machine/Machine.cpp @@ -0,0 +1,80 @@ +#include "modeling/machine/Machine.h" + +namespace Modeling +{ + Machine::Machine(int id) : busy(false), currentWorkload(), id(id) + {} + + void Machine::addCPU(CPU c) + { + cpus.push_back(c); + } + + void Machine::addGPU(GPU g) + { + gpus.push_back(g); + } + + void Machine::giveTask(Simulation::Workload* workload) + { + busy = true; + currentWorkload = workload; + } + + bool Machine::isBusy() const + { + return this->busy; + } + + uint32_t Machine::getSpeed() + { + int speed = 0; + for(auto cpu : cpus) + { + speed += cpu.getSpeed() * cpu.getCores(); + } + return speed; + } + + void Machine::work() + { + if(!currentWorkload) + return; + + currentWorkload->doOperations(static_cast<int>(getSpeed() * load)); + + temperature += load * temperatureIncrease; + //load = temperature < 70.0f ? 1.0f : 1.0f / (temperature - 69.0f); + load = 1.0f; + temperature = temperature > maxTemperature ? maxTemperature + : temperature < minTemperature ? minTemperature + : temperature; + } + + int Machine::getWorkloadId() const + { + if(currentWorkload) + return currentWorkload->getId(); + return 0; + } + + int Machine::getId() const + { + return this->id; + } + + float Machine::getTemperature() const + { + return this->temperature; + } + + int Machine::getMemory() const + { + return this->memory; + } + + float Machine::getLoad() const + { + return this->load; + } +} diff --git a/Simulator/src/simulation/workloads/Workload.cpp b/Simulator/src/simulation/workloads/Workload.cpp new file mode 100644 index 00000000..b6a3b2d0 --- /dev/null +++ b/Simulator/src/simulation/workloads/Workload.cpp @@ -0,0 +1,47 @@ +#include "simulation/workloads/Workload.h" + +#include <iostream> + +namespace Simulation +{ + Workload::Workload(int size, int startTick, int dbId, int traceId, int dependency) : dependencyId(dependency), remainingFlops(size), TOTAL_FLOPS(size), START_TICK(startTick), ID(dbId), TRACE_ID(traceId) {} + + void Workload::doOperations(uint32_t opCount) + { + if (opCount < 0 || finished) return; + + if (remainingFlops <= opCount) + { + remainingFlops = 0; + finished = true; + } + else + { + remainingFlops -= opCount; + } + } + + uint32_t Workload::getRemainingOperations() const + { + return remainingFlops; + } + + uint32_t Workload::getTotalOperations() const + { + return TOTAL_FLOPS; + } + + bool Workload::isFinished() const + { + return this->finished; + } + uint32_t Workload::getId() const + { + return ID; + } + + int Workload::getDependencyId() const + { + return this->dependencyId; + } +} diff --git a/Simulator/src/simulation/workloads/WorkloadPool.cpp b/Simulator/src/simulation/workloads/WorkloadPool.cpp new file mode 100644 index 00000000..c4910c7f --- /dev/null +++ b/Simulator/src/simulation/workloads/WorkloadPool.cpp @@ -0,0 +1,69 @@ +#include "simulation/workloads/WorkloadPool.h" + +#include <iostream> +#include <algorithm> + +namespace Simulation +{ + void WorkloadPool::addWorkload(Workload w) + { + workloads.push_back(w); + } + + std::vector<Workload*> WorkloadPool::getWorkloads(uint32_t currentTick) + { + std::vector<Workload*> filteredOnStarted; + for(Workload& w : workloads) + { + if(w.getStartTick() < currentTick) + filteredOnStarted.push_back(&w); + } + + return filteredOnStarted; + } + + Workload& WorkloadPool::getWorkload(int id) + { + auto it = std::find_if(workloads.begin(), workloads.end(), [id](Workload& w) { + return (id == w.getId()); + }); + + return *it; + } + + void WorkloadPool::clearFinishedWorkloads() + { + auto it = workloads.begin(); + while(it != workloads.end()) + { + if(it->isFinished()) + { + std::cout << "Finished workload " << it->getId() << std::endl; + int id = it->getId(); + setDependenciesFinished(id); + it = workloads.erase(it); + } + else + { + ++it; + } + } + } + + void WorkloadPool::setDependenciesFinished(int id) + { + for(auto& workload : workloads) + { + if(workload.getDependencyId() == id) + { + workload.dependencyFinished = true; + std::cout << "Finished dependency of " << workload.getId() << std::endl; + } + } + } + + bool WorkloadPool::isEmpty() + { + return this->workloads.size() == 0; + } +} |